Hanging Unique Bathroom Mirrors
Unique bathroom mirrors is a useful and decorative focal point. A big mirror weight is the most important factor to consider when it’s hanging. Insufficient weight-bearing hardware may fail and cause the mirror to fall, possibly injuring someone and damaging the sink and vanity.
12 Photos Gallery of: Hanging Unique Bathroom Mirrors
Weigh the unique bathroom mirrors by stepping on a bathroom scale, recording your weight and then climbing on the scale while holding the mirror. The difference in weights is the importance of the mirror. Buy two triple-nail plank hooks classed for the weight of the mirror. Hold the mirror in place under the guidance of a helper indicating when you hold the mirror at the correct height. Have two people hold the mirror if it is too heavy for a person to keep properly. Mark the mirror on the wall with a pencil.
Measure the sink or vanity that you want to center the unique bathroom mirrors over. Draw a line up the wall from the center of the sink or vanity up to the height mark, using a tape measure as a guide. Measure the back of the mirror to determine its width. Mark the center of the mirror at its peak using a pencil. Measure 6 inches on either side of the center point and mark these spots on the back of the mirror. Place your fingers under the thread on the back of the mirror, even with the last two marks you made. Pull wire up to the top of the mirror. When the thread is taut, mark on the back of the mirror the spots where your fingers are.